Mud? BRING IT ON!|No More Cables & Chains

Feb 26, 2020
328 304 Views

New CV joint, new camera, and new Yankum ropes. Seems like the old eventually has to make way for the new (except BIG WHITE TRACTORS). Repairs and upgrades on the farm are essential to keep the business going.
We are super excited to use Yankum kinetic recovery ropes. Pulling machinery with cables and chains always sends shivers up our spines as they can be dangerous. Ropes are much safer and easier to manage!
Go to this link and use referral code: Welker
To save $100 - Join today with promo code: WELKER100
P.O. Box 771, Shelby, MT, 59474

  • Was just about to say that

    Aaron BAaron B19 hours ago
  • Those Ropes are Sweet !!!! Never realized that is the BIG BUD on All the Videos 👍🏻👍🏻👍🏻👍🏻

    Chris WhiteChris WhiteMonth ago
  • gfbf

    Yeet XxicomxXYeet XxicomxX2 months ago
  • Wow it took almost the entire video to get to the rope section....

    Valentin DiazValentin Diaz3 months ago
  • There should be ft lbs tq for that nut posted somewhere.

    Roger DickinsonRoger Dickinson3 months ago
  • Came for the Yankum rope review, stayed for the awesome content! 😎

    that6.7guyythat6.7guyy4 months ago
  • I have that same exact problem, they can never make them perfect :(

    6th Generation Farmer SD6th Generation Farmer SD5 months ago
  • #GetTeeerrrrStuck!! Lol

    Daniel JohnstonDaniel Johnston6 months ago
  • Here in germany we say: "Frau am Steuer? Das wird teuer..." ("When a woman drives it's gonna be expensive...") Except for my wife of course! (...because she's standing right behind me with a rolling pin in her hand...) 😖👍🏻

    Olaf SchmidtOlaf Schmidt6 months ago
  • Great video!

    Floyd FergusonFloyd Ferguson7 months ago
  • You cannot run your vehicle without the cv axles. It preloads the wheels bearing they backup too

    Yamaha RiderYamaha Rider8 months ago
  • Hard to believe that such a big tractor has just one open, sharp-edged hook which is fixed in a position you can hardly reach when you really stuck in the mud out there. 🙈

    Jürgen ThomasJürgen Thomas8 months ago
  • Thank you for sharing!

    Ron AndersonRon Anderson8 months ago
  • Great video guys, I appreciate the content you Welker’s put out👍

    Paul GribbenPaul Gribben8 months ago
  • I know I’m late to the party here, and it’s maybe been mentioned, but after torquing down that CV joint nut on the hub, you should back it off 1/8-1/4 turn.

    Titan_E34Titan_E348 months ago
  • you need an omnidirectional microphone, not a unidirectional. That'll be better for all around use.

    Tob RahamTob Raham8 months ago
  • For the truck doing 180,000mls it looks very tidy, clean underneath and no rust. Very good bodywork. You welker boys look after your machinery very well.

    Carl StevensCarl Stevens8 months ago
  • Run without the front axles??? The wheel hub separates and the front wheels fall off without the nuts on the axles holding the hub together. Don't ask me how I know...

    myjob121myjob1218 months ago
  • For 10 minutes there I forgot the video was about cables and chains and before I realized I was reading a bunch of comments about CV Joints. Y’all need to round up the corners on that hook under the tractor or y’all be buying a lot of that rope!

    Don LosDon Los8 months ago
  • Just replaced ball joints, control arms, tie rods, tie rod ends, shocks, sway bar linkage and water pump on my 02 Denali. It was all still original, but it only had 171k. The ball joints had been hot and were a pain. Stuff that was long over due!!!

    Chris GeorgeChris George8 months ago
  • Just tried to watch your video. CV joint = Constant Viscosity Joint, A joint submersed in grease, There is no such thing as a CVC joint?? If so, please explain the Acronym for what you say way too much. Thank you.

    charles baran IIIcharles baran III8 months ago
  • Or better, I can change my situation and just come over....farmin'

    Kris BowerKris Bower8 months ago
  • Dude, Legarms, can you come over to Switzerland and be my work guy! :)

    Kris BowerKris Bower8 months ago
  • Yo. Was Legarms using a chrome extension on an impact...? I too like to live dangerously

    Matt HMatt H8 months ago
  • Constant Velocity ... cake? ... perhaps?

    Norman HarrisNorman Harris8 months ago
  • Those Buds are so Beautiful!!!

    FreightDawgFreightDawg8 months ago
  • @Welker Farms Inc you can also try the Gopro Media Mod. It allows you to use an external mic and USB-C chargeport while it is in a (non-waterproof) case.

    Offroad ChannelOffroad Channel8 months ago
  • Yep I agree with John Smith Well I guess it depends where your from) CV Joint. Well the nice thing is ya don't have to bad of the roads coming up by the horse feed lot or coming up dump road to get home. It's a buger coming the Bronken or the Telstad Rd. and washbard roads. Another great video. Love the ropes. Thanks for sharing, God bless and keep up the good work!

    Mason KeyserMason Keyser8 months ago
  • I have a military snatch rope rated for 65k. Pulled a 10 wheel dump truck out with a 1/2 ton truck. Go about 10 mph it will stretch out, then retract.

    2chipped2chipped8 months ago
  • Sounds just like a iPhone battery

    Matthew ThibodeauMatthew Thibodeau8 months ago
  • Where can is find the battery handle?

    Rik Van EschRik Van Esch8 months ago
  • Hate to say it but I’m actually looking forward to seeing you guys get stick now...... btw the kinetic recovery ropes are amazing! Been using a bubba rope for years now and never looked back!

    Josh EarleJosh Earle8 months ago
  • What did you use for battery charger for go pro and the foam housing?

    ray wyngardenray wyngarden8 months ago
  • Check out Matt's Off-road Towing and Recovery on USworlds. He's sponsored by Yankem Ropes and is based in southern Utah.

    Alec WilsonAlec Wilson9 months ago
  • Excellent

    joel mollenkopfjoel mollenkopf9 months ago
  • Had to skip thru most of the vid

    hksjoshuahksjoshua9 months ago
  • You're killing me with the CVC. lol It's CV Joint, CV Axle, or CVD (Constant Velocity Drive/shaft). ;)

    Nicholas BarberNicholas Barber9 months ago
    • @Welker Farms Excellent save!!! :D lol

      Nicholas BarberNicholas Barber9 months ago
    • Constant velocity coolness!!

      Welker FarmsWelker Farms9 months ago
  • Hole e sheeet that had not occured to me regarding the cables and being aware which way they are spun. Good good vid thank you.

    Daniel MarshallDaniel Marshall9 months ago
  • Для всіх земляків

    Сергій КубрякСергій Кубряк9 months ago
  • waiting to see some mud now xD

    the pizza devilthe pizza devil9 months ago
  • Have you tried a DSLR camera with a battery grip for the main vlogging camers. (Deboss garage)

    augustaugust9 months ago
  • Love those Kinetic Ropes💪💪👍

    Bob PatersonBob Paterson9 months ago
  • 14:30 "With the big dead cat on it" Lol!

    coolivatocoolivato9 months ago
  • Love your vids

    John PowersJohn Powers9 months ago
  • Always use a d-ring, and build a latch on the tow hook of the bud that will prevent the d-ring from slipping off.

    Kris KohutKris Kohut9 months ago
  • Did you tighten top of struts Legarms?

    Kris KohutKris Kohut9 months ago
  • You know that "kinetic energy" rope sounds a lot like nylon. Of course Yankum doesn't share anything about their materials. It's obviously a special weave that allows a lot of stretch. I'm sure most are aware of the dangers of a rope that stretches then pulls something out with its kinetic energy. You always need to hook to something SOLID, never anything that can snap off and become a projectile. This includes clevises and anything else used to couple up. Smaller scale, but I know a guy that took a 2" hitch ball to the eye socket when a nylon rope snapped the ball off the pickup bumper. Some guys mentioned throwing a tarp or a jacket or something over the rope to help control it in the event of a break. Although I have no experience with the subject rope, it seems like it would need a big top circus tent thrown over it to even start to control it. This is major league stuff. Everyone be careful!

    Bly thkdBly thkd9 months ago
  • It looked like the tow hook you welded on has sharp square corners that may possibly cut into the new rope ? You may want to knock the edges down to help not cut it

    Scott HawkinsScott Hawkins9 months ago
  • Looks like you hurt your one finger

    TheAB416TheAB4169 months ago
  • You cant run the truck without front axles the wheel bearings fail immediately (made the mistake on my gmc sierra had an fail on the road thought I could make it home was wrong)

    Craig the farmerCraig the farmer9 months ago
  • Some don't know what a CVC is: Constant Velocity Connector -

    hikingtosurvivehikingtosurvive9 months ago
  • Remanufactured for the guy who loves doing a job twice!

    Scooter 2koolScooter 2kool9 months ago
  • I think that the PERFECT farm blogging camera designer is the guy that you see in the mirror each morning.

    Joe Silva SrJoe Silva Sr9 months ago
  • Looks like as talented as LegArms is, you should ease that sharp proud edge on those tow hooks that Bud puts on. Cut out that part of tension. Good Luck You guys are getting very good at this movie stuff.

    Rick ChristiansonRick Christianson9 months ago
  • That’s a good investment. There is a lot of risk using chains because they can break and it the windshield that can cause a fatal accident

    Noah MurphyNoah Murphy9 months ago
  • About how much did that tow rope cost and rating?

    Jason WellsJason Wells9 months ago
  • The corners on your pull points need to be softened or the rope will be cut. Best to use a shackle to make the connection.

    Lawrence RaybornLawrence Rayborn9 months ago
  • Those work great to get stuck buds out. Had one on a place in Havre that I worked at and got a big bug stuck.

    Dale BoothDale Booth9 months ago
  • I have a question about tightening lug nuts, i have been told to cross tighten them but also in a clockwise motion. Which one would you perfer?

    DibsRibsDibsRibs9 months ago
  • It works like a giant rubber band

    Farmer CraigFarmer Craig9 months ago
  • CV not CVC

  • Here you go hollywood!!

    mchnbldrmchnbldr9 months ago
  • Shouldn't you have probably hidden your car's plate number so you don't have people harass you? O.o

    Youtube Medical OfficerYoutube Medical Officer9 months ago
  • I love the case cardboard over the John deere made me laugh for a minute

    Seth HiltSeth Hilt9 months ago
  • Big bud tug of war?

    Cornelius FarmsCornelius Farms9 months ago
  • I’m from SanAntonio, hope you enjoy your time that you’re here. Whole lot different weather here!

    robert wrightrobert wright9 months ago
  • I'm from Australia. And i love your videos welker farms

    Black hammerBlack hammer9 months ago
  • Sup

    iBelieveiBelieve9 months ago
  • Hello

    iBelieveiBelieve9 months ago
  • Hey

    iBelieveiBelieve9 months ago
  • Hi

    iBelieveiBelieve9 months ago
  • This guy uses Yankum ropes with an XJ to pull everything out. Diesels with campers in sand no problem.

    Challenger HitchmanChallenger Hitchman9 months ago
  • A little tip for changing out the cv axel..remove the sway bar end link and the same side sway bar mounting bracket. I'm a mechanic for my township and I change at least 10 every year

    Racing SlippersRacing Slippers9 months ago
  • Whats your opinion about planting Barley for the 2020 season?

    Matthias MohrMatthias Mohr9 months ago
  • Been watching for probably a month. Old videos and such. Blew my mind when my big bud mod in farm sim 17 had your logo. So cool. Also any chance those case hats would be printed again ?

    Matt SinnottMatt Sinnott9 months ago
  • Came for the big bud. Stayed for the GMC Yukon

    Matthew KrohnMatthew Krohn9 months ago
  • we are having the same promblem with are 03 yukon. we balanced the tires and it was a waste of money!

    matthew x2matthew x29 months ago
  • cvc?? this is driving me crazy!!!!!

    Chad AKA Coldest1Chad AKA Coldest19 months ago
  • "Vibration......

    nh 6080nh 60809 months ago
  • Axle nuts are supposed to be torqued so there is the right amount of pre load on the wheel bearing and if it’s to tight it will wreck the wheel bearing

    Cole LarsonCole Larson9 months ago
  • Minnesotans listen up the house last night passed HF8 Hf9 gun grabbing bills call your senators and tell them to oppose these gun grabbing bills......

    Wanda HelmerWanda Helmer9 months ago
  • Nick, search BKXC in you tube. He is a mountain biker that built a Hero 7 in a similar way. Might be some ideas there.

    Brad JohnsonBrad Johnson9 months ago
  • Where's the link for power bank?

    umekbabicumekbabic9 months ago
  • 1800 acres and where is that wonder rope, oh thirty minutes round trip and then where is hollywood, he put it away or it worked but it pulled the rear end out of the truck.... always something in my world. Its like how can we mess with him this time... Oh you set up tow stations in problem area. I think having a drone with you at all times working is a plus... super camera 101 is now 299 and will be 357 soon.

    Morgan AdairMorgan Adair9 months ago
  • Trade it in and get her something nice. Now hurry up.😆

    Thomas BlaiknerThomas Blaikner9 months ago
  • Those ropes don't like any sharp edges. Spend some time with a grinder or use shackles. Also, try to keep them out of sloppy mud as much as possible. The dirt and grime can also cause abrasions to the rope damaging over time.

    Oz GuyOz Guy9 months ago
  • Is that a Diesel cause it looks like a heater plug in the front

    Kendall CollinsKendall Collins9 months ago
  • "Fix problems before more serious problems arise" - and that is why universal healthcare is cheaper in total :)

    DeutschehordeneliteDeutschehordenelite9 months ago
    • Deutschehordenelite. What your commie agenda has to do with a CV axle change no clue.

      Scooter 2koolScooter 2kool9 months ago
  • What is a "CVC"??? LOL

    No BodyNo Body9 months ago
  • 15:00 Where can I get that Black thing you get in the left hand ????

    David WhiteDavid White9 months ago
  • I like the look got hem tow ropes. Dad had an old school rope like that, the one loop bit the dust a few years ago and we’ve been kinda keeping an eye out for a new one. I’ll be checking these Yankum fellas out.

    ih1206ih12069 months ago
  • Isn’t that just like marine ropes for some huge huge ships

    Sean SengpielSean Sengpiel9 months ago
  • Tow ropes/straps are far better in my experience. They have some give, and will absorb the shock when you pull the slack out.

    Roboticus Prime RCRoboticus Prime RC9 months ago
  • Try rotating tires front to back. Even if it balances out, the wheel could be warped or bent. I know from experience. If you rotate the tires and the vibration leaves the front end and goes to the rear, one or more of your wheels are in some way causing vibration. You must thoroughly test every component that could cause the issue until you find the faulty component.

    Shaman CredibleShaman Credible9 months ago

    Spark in the DaRKSpark in the DaRK9 months ago
  • Is the coronavirus already there in Montana

    Savvas GreasidisSavvas Greasidis9 months ago
    • Not yet

      Robert WelkerRobert Welker9 months ago

    Green’s grading and contracting LLCGreen’s grading and contracting LLC9 months ago
  • Ford Super Duty 4x4 have solid front axles. No CV joints!

    John ColvinJohn Colvin9 months ago
  • Excellent quality work here guys.

    highlights Bottle flip nbanflnhlhighlights Bottle flip nbanflnhl9 months ago