BLIZZARD!!|Leg Arms holding DOWN the FORT & new CAMERA?

Mar 18, 2020
234 140 Views

With Dad and Nick almost finished with the Lake House interior, Scott (Leg Arms) has stayed at the farm doing maintenance in the shop and keeping tabs on the property. This storm is our second biggest of this season with over 10 inches of snow and a nasty 40 mph wind making huge drifts. But a large front end loader makes for a quick cleanup. Leg Arms also works his magic on our 40ft transfer auger and gets it ready for the season.
Nick had it with Gopro and decided it was time to say goodbye and go with a different brand. Just not enough reliability to stay with the hero line. BRING ON DJI OSMO ACTION CAM!
DJI OSMO Action Cam:
Mic adapter:
Battery hand grip:
USB cable:
Swivel mount:
To save $100-Join today with promo code: WELKER100
P.O. Box 771, Shelby, MT, 59474

  • Leave the crop cover on your fields to capture the snow on the field instead of the snow blowing off the fields. Windbreaks will help also. USDA will pay for putting in windbreaks.

    Richard GRichard G19 days ago
  • I think you could do a much better in your welds the big gobs look terrible come on gring file clean and paint it black the Camera is great but the brackets very unprofessional

    Keith HibbardKeith Hibbard3 months ago
  • The Welkers: Modifiers of the modified AND IT WORKS! Enjoy your programs.

    mays coopermays cooper3 months ago
  • Don't worry. Your Great Lakes brothers and sisters can preach a sermon on wet and dry snow. Great video.

    fbh31118fbh311183 months ago
  • Poor combines

    xXPeeerli13Xx GamingxXPeeerli13Xx Gaming4 months ago
  • can i have the hero camra

    Scotty SwartzScotty Swartz4 months ago
  • Too much talking, that been said Shut up 🤐

    Saad al-shammriSaad al-shammri5 months ago
  • You seem to have some audio sync issues with this....

    davehd2009davehd20095 months ago
  • Not being negative to you guys but you should have built that building 2 foot higher so you didn't need low headroom garage door because lh doors don't work as good.

    Weaver KevinWeaver Kevin6 months ago
  • Great video!

    Floyd FergusonFloyd Ferguson7 months ago
  • Hey I saw your video and I was wondering what type of tools you use because I would love to try one of these just a little bit less to scale

    Chance SpillersChance Spillers7 months ago
  • As i understand you are using a directional microphone. as i see that you have it facing forward, which is great in front of camera but if behind camera the sound is not that great what if you point it straight up might get good audio both side of camera

    Hans HardtHans Hardt7 months ago
  • I thought I was the only one that told things to " Stay ".... Thay don't always listen. ...

    pat36apat36a8 months ago
  • Hey I finally made me an account, new to you tube but I admire you and Hollywood. I would love to come up sometime and help. I want you to know leg arms. You and Hollywood are some of the most polite people I have ever seen. I am a mechanic/body man by trade but I am a farmer at heart. I raise hogs and chickens for my family. But I’d like to stop by someday and meet you guys in person. Godspeed brothers.

    Dustin TharpDustin Tharp8 months ago
  • Yo

    iBelieveiBelieve8 months ago
  • Sup

    iBelieveiBelieve8 months ago
  • Hello

    iBelieveiBelieve8 months ago
  • Hey

    iBelieveiBelieve8 months ago
  • Hi

    iBelieveiBelieve8 months ago
  • People don’t realize farmers are smarter then you think, obviously they considered the fact that turning something around would switch the rotation, hence why they turned the motor around? Common sense ain’t so common anymore.

    Peter BishopPeter Bishop8 months ago
  • Is the gas tank mounted a little to close to the engine? Other than that thought, excellent job!

    Brian DubachBrian Dubach8 months ago
  • Can’t wait to see how the new camera works have a blessed day

    Dan FinleyDan Finley8 months ago
  • Try some brake parts cleaner on the ball to increase friction to hold camera.

    Flatbed Trucking, Sam Rides.Flatbed Trucking, Sam Rides.8 months ago
  • Hey Guys! I figured it out!!! Miss you you guys!!

    Bales Hay Farm and RanchBales Hay Farm and Ranch8 months ago
  • The Corona virus is making things gifficult here in the Islands. People panicing & buying without considering their neighbors...definitely NOT Hawaiian!!!! COSTCO lines are a nightmare...over a 100 people lined up outside which is a pandemic waiting to happen...BE SAFE PEOPLE!!!!!

    Kohala Iron WorksKohala Iron Works8 months ago
  • Legarms you never cease to amaze me with your fab work. Your hose bench is awesome. Nice camrea there Nick. Love you guys!!! Aloha, Chief

    Kohala Iron WorksKohala Iron Works8 months ago
  • what the brand of hydraulic hose crimper is that

    Caleb HerbertCaleb Herbert8 months ago
  • They just stick you with all the hard work. Love your channel. God Bless.

    Keith WestbrooksKeith Westbrooks8 months ago
  • I used to use blue jean leg material under my welding mask to keep the slag from dropping down my shirt collar and from burning my head. It worked great!

    Patman CrowleyPatman Crowley8 months ago
  • Leg Arms is stealing the show..better vid with his in it! :-D

    Horst SzibulskiHorst Szibulski8 months ago
  • WHite balance is WAY Off on the new cam.

    Brian BeardBrian Beard8 months ago
  • Welker farms dog segment when

    Dixie FarmboyDixie Farmboy8 months ago
  • Super fashionable bracket!

    Kacee SavageKacee Savage8 months ago
  • Sure am glad u said "you'll see" cuz I explained how and wut and where it goin and I still couldn't see the finished product.. nice job 😎👍

    Carlos GalvanCarlos Galvan8 months ago
  • new camera is a W

    QuakA OatsQuakA Oats8 months ago
  • Seems like the video quality isn’t as good.... Is that just a setting?

    rem32001rem320018 months ago
  • Would cover crops hold the snow? If they held the snow, would that make up for the moisture used by the cover crop, and give even moisture across your field?

    J HuelsmannJ Huelsmann8 months ago
  • I social distanced before this virus so I'm good.

    josh33025josh330258 months ago
  • Legarms do you have an engineering degree? Because the things you do are amazing.

    DaDevilDaDevil8 months ago
  • Sorry for the newb question,, but why not a rearward facing mike as well? Also amazing to see your dry snow ! In Aus ours is always wet,, and on the tops of our mountains.

    Pedro TheSwiftPedro TheSwift8 months ago
  • I find it funny you wear the welders hat but I don't think I've seen you wear gloves when you weld, tough hands I guess!

    KEN ADAMSKEN ADAMS8 months ago
  • Why do you never weld with gloves on

    Jacob HanerJacob Haner8 months ago
  • Those home-made brackets with all the welds & hardware on that camera give it a real steam--punk look! Great video/audio quality, too! To all you Welkers, stay safe & healthy out there!!!

    gac914gac9148 months ago
  • i think people just need to chill out about the corona virus the news is make it sound a lot worse that it is

    Sand FarmsSand Farms8 months ago
  • had to chuckle, no gloves but rocks the hat! way to go legarms :) Greetings from ND

    Andrew SchottAndrew Schott8 months ago
  • The biggest things we have learned from the "pandemic" is that stupidity is more contagious than Covid 19 and common sense is in shorter supply than toilet paper.

    Freedom FarmsFreedom Farms8 months ago
  • I would stick with "Leg Arms." They could of called you "But Head" and M-tv would get you on copy rights.... lol Scott your the MAN!

  • I really like watching you guys I think everybody should watch your channel if for no other reason than to see what it takes to put food on there tables,I know how much work it is ,I grew up on a dairy farm where the work never ends keep it up guys I always watch what you guys put out.

    Jack PennerJack Penner8 months ago
  • Nike, for your ball mount slippage, try a little spray adhesive and a bit of sand sprinkled on while the glue is wet. Let dry. Should be enough grip to hold it tight.

    Doliver LipkeDoliver Lipke8 months ago
  • being the handy guy you are in the shop, why not build a plow for the loader

    Clint StallClint Stall8 months ago
  • SmallRig Vlog Case for GoPro Hero 8 Black looks like the one you build..

    daniel olssondaniel olsson8 months ago
  • Excellent, I really enjoy all of the Welker Farm Videos. Especially now that we are staying in the house all the time. Just had a friend from church die and another friend from church is very sick. Thank you guys. John

    john knaussjohn knauss8 months ago
  • I was down past you guys on March 10th and seen someone out seeding with a big air drill a little south of Shelby.

    Jo CampJo Camp8 months ago
  • UK leg arms you could prob make a push plow for pushing snow with some of the scrap iron you got

    Matt GroverMatt Grover8 months ago
  • Hey Scott, when you were walking in the snow drifts and all the wind, you sounded SO MUCH like Nick wh n the microphone was mainly picking up wind, can definitely tell you guys are brothers

    Tractors Trucks and PupsTractors Trucks and Pups8 months ago
  • Seriously, legarms should not be making videos. He is soooo boring and annoying.

    T GilderT Gilder8 months ago
  • They make a hyd safety relief cutout for bin sweeps. It will stop the flow to the motor if there is enough back pressure from the sweep. My Wheatheart sweep has one. Works good and you then have an on/off in the bin with you if you plumb it in by the motor.

    Jason GratJason Grat8 months ago
  • @25:11, Is that bolt welded to the bracket or did you leave it in the chicken coop overnight??

    Terel HuttoTerel Hutto8 months ago
  • Why are you keeping the combine out?

    SIMONESIMONE8 months ago
    • Cause still peas in the shed but are marketed

      Robert WelkerRobert Welker8 months ago
  • Dumb, non-tech/mechanicy kinda question for you hands-on guys...what's the blue "Teflon" tape at about 7:45? Never saw blue...

    Kris BowerKris Bower8 months ago
    • @Robert Welker Thank you for that info!!!

      Kris BowerKris Bower8 months ago
    • It's a heavier tape used in oil industry and such

      Robert WelkerRobert Welker8 months ago
  • Hey guys just wanted to say stay safe and stay healthy out there. As for me I'm stuck in California under a stay at home order from the governor. I need to move back east and into the country.

    Jeffrey MurdockJeffrey Murdock8 months ago
  • insane fabrication skills, and ingenuity!!

    cameron kridercameron krider8 months ago
  • Thumbs up Leg Arms !!! Great video THANKS !!!!

    Dennis HettingerDennis Hettinger8 months ago
  • Yay I been telling you about this. I’m so glad hope you love it.

    SLC FarmsSLC Farms8 months ago
  • wears a welding cap for not getting embers in his hair, doesn't wear safety glasses. lol

    Leakproofcow88Leakproofcow888 months ago
  • For Leg Arms , speaking of keeping sparks off your head , i saw you welding with your ungloved left hand , i used to do that until one of the guys i was working with played around with the wire speed on my welder after lunch and when i came back to weld on the applicator machine i was working on i had a big blob of slag roll down and stuck to my wedding ring and you can guess what happened, i did manage to save my finger and even the ring after some work from the jeweler and my wife , i still don't like welding gloves but i do wear a pair of regular leather gloves on my left hand at the very least, boy howdy it hurt, but old habits. It's good someone is at home getting real work done 🤣 keep it up 👍

    Sam SchneiderSam Schneider8 months ago
  • I'm a welder by trade, I wear them everyday while working, if people give you flak for it, just tell em to ingest a satchel of Richards lol

    Maverick CornettMaverick Cornett8 months ago
  • Does anyone else think think the GoPro is better quality 😂😂😂

    Noah PedersenNoah Pedersen8 months ago
  • Where do I sign up for the Scott school of making everything look easy and work perfect? Love your hard work Scott. And it's safe too. And thanks for the camera update Hollywood.

    Tom CleghornTom Cleghorn8 months ago
  • My Hero8 is every bit as disappointing as my Hero6. Why on God's green earth can't GoPro make a camera that DOESN'T forget the time and date? I have 32,000 video clips in my library and thanks to GoPro I wind up trying to discern which January 2016, videos are the ones I need to edit into my latest videos. Please report how this new camera works as I'm ready to shoot my GoPros if USworlds wouldn't demonetize the video for mentioning a pew, pew, pew.

    MinnesotaEricMinnesotaEric8 months ago
  • Its a scam and a sure fire way to turn this into a socialist country within days

    M.J GilmoreM.J Gilmore8 months ago
  • Let's see a blooper video everyone can use a good laugh

    nick fritternick fritter8 months ago
  • I am starting up a USworlds channel that while show what my family does on a cattle ranch and i need to know what the best camera is to use. What kind of camera do you guys use?

    Cory BlackCory Black8 months ago
    • Was Gopro but switching to DJI Osmo

      Robert WelkerRobert Welker8 months ago
  • honestly the gopro has better camera quality

    Nick ReulingNick Reuling8 months ago
  • Man I wear a welders cap all day at work . I'm a welder those caps save your hair trust me!

    hunter paylorhunter paylor8 months ago
  • What model is your new camera nick and were did you get it from ! looks to work very well

    simon priestmansimon priestman8 months ago
    • Osmo DJI

      Robert WelkerRobert Welker8 months ago
  • Please please please get a barn for those combines!

    David AndrewsDavid Andrews8 months ago
  • Good video guys God bless

    Hunter 747Hunter 7478 months ago
  • I have a saying Function 1st..... appearance later Maybe

    Rich OvermyerRich Overmyer8 months ago
  • Hey Nick I think I could 3D print camera brackets to replace your custom designer brackets. I'm not sure they would look as professional as yours but they'd be functional. And it looks like a fun project ...

  • i have a go pro hero 3+ and im not in happy with so quit use it.

    Jeff KuipersJeff Kuipers8 months ago
  • It’s too wet here in Nebraska we were supposed to be getting our fields ready but we don’t want to get stuck

    Maverick WayneMaverick Wayne8 months ago
  • Border Collie 17:29

    Mister SMister S8 months ago
  • I think Big Bud needs a plow. 30 foot snow drift? you mean that speed bump? Also, Scott's "Not a cutting jig" is genius. Any who, it might be worth looking into some kind of filter to stick over the lens on your new camera, the video seemed really washed out.

    Thermidor E1Thermidor E18 months ago
  • I think the welkers farm end goal should be acquiring the 747?

    WannaberangerWannaberanger8 months ago
  • I had a machine shop for many years. I really enjoyed lathe work. Among other abilities, Leg Arms, you really seem to know your way around the engine lathe! I like seeing those projects!

    Bob FischerBob Fischer8 months ago
  • I'd be riding the atv in the snow 😁

    mark pettitmark pettit8 months ago
  • Are you LDS?

    Levi SmithLevi Smith8 months ago
    • Non Denominational

      Robert WelkerRobert Welker8 months ago
  • Now that you have your camera rig mostly figured out; have LegArms fab up a pretty version of it for you. This request is mostly just because I like watching him fab stuff.

    CthulhuCthulhu8 months ago
  • Clean it up a little bit then patent it and sell your camera set up! 🎬🎬🎬🎥🎥🎥

    Albert KloseAlbert Klose8 months ago
  • Apparently farmers are the only ones not taking a quarantine break

    SamuelSamuel8 months ago
  • You will be demonized for saying carona virus

    Garret VarilekGarret Varilek8 months ago
  • Is't it weird how America now realizes how much we really need the unsung heroes like your family to get us the food we need. Keep up the good work

    Frank GilletteFrank Gillette8 months ago
  • Get a snow pusher for that loader. You will not regret it! I’ve plowed snow with a loader and it is painful.

    Tom RuggTom Rugg8 months ago
  • He’s saying feed me

    SS8 months ago
  • Y’all getting snow we keep getting rain

    Bill BoothBill Booth8 months ago
  • So, if ya can't weld it ya can't make it. hahaha

    Robert MacCreadyRobert MacCready8 months ago
  • Americans stick together regardless of politics ! 👍

    Jerry GlenJerry Glen8 months ago
  • I also have GoPro but now waiting on your assessment of the DJI Osmo......

    William MayberryWilliam Mayberry8 months ago
  • Glad to see you guys trying out the DJI cams i've been doing a bunch of research trying to figure out which is the best, in your video the quality wasn't that great on the dji but i'm pretty sure you can adjust settings to get er dialed in, i'm looking forward to seeing how they work out for you, be awesome if you could do a video down the road on your thoughts on the dji vs gopro. Legs arsm you sir a wizard In the shop.

    Rocky Run Angus RanchRocky Run Angus Ranch8 months ago